Clamps / Jigs
Brand: PONY
MPN: AC8072
Cabinet Master 90° parallel jaw bar clamp - 72-inch | 1830 mm [#8072]
The Jorgensen Cabinet Master 90° parallel jaw bar clamp is a cabinetmaker's best friend. Its large plastic jaws
distribute clamping pressure over wide areas and stay parallel to assure square corners and prevent workpieces from
bowing or lifting. This makes it the perfect clamp for flat-panel, box, cabinet, frame, and panel-door assemblies - or
any project that requires squareness or evenly applied pressure.
A built-i..
N$ 1,897.50
Ex VAT:N$ 1,650.00
Brand: PONY
MPN: AC8511
Cabinet Claw [#8511]
Complete your cabinetry projects in a fraction of the time with Pony cabinet claw. This unique and patented tool
combines the various steps of face-frame cabinet installation into one easy process. The high-quality aluminum claws and
alignment plate have protective rubber pads to cushion and protect cabinetry.
The Pony cabinet claw is a unique clamping tool which combines the multiple steps of face frame cabinet installation
into one easy process.
Using this Pony c..
N$ 661.25
Ex VAT:N$ 575.00
Brand: TORK CRAFT
MPN: BIS020
Biscuits
Box of 1000 biscuits for a biscuit joiner #20
Application:
A biscuit joiner is a woodworking tool used to join two pieces of wood
together. In this case it would be used to join with the biscuit #20.
A biscuit joiner uses a small circular saw blade to cut a crescent-shaped hole
in the opposite edges of two pieces of wood or wood composite panels.
An oval-shaped, highly-dried and compressed wooden biscuit (made f..
N$ 1,014.01
Ex VAT:N$ 881.75
Brand: TORK CRAFT
MPN: CL CICC3A
G-clamp set
Clamps in the set:
(x1) G-clamp with 25mm clamp capacity.
(x1) G-clamp with 50mm clamp capacity.
(x1) G-clamp with 75mm clamp capacity.
Application:
The G-clamp is used to secure workpieces to a bench or a template during an
assembly. It can also be used in woodwork projects to glue/join pieces of wood.
The G-clamp is manufactured from carbon steel and has been powder coated.....
N$ 261.45
Ex VAT:N$ 227.35
Brand: TORK CRAFT
MPN: CL CICC3B
G-clamp set
Clamps in the set:
(x1) G-clamp with 50mm clamp capacity.
(x1) G-clamp with 75mm clamp capacity.
(x1) G-clamp with 101mm clamp capacity.
Application:
The G-clamp is used to secure workpieces to a bench or a template during an
assembly. It can also be used in woodwork projects to glue/join pieces of wood.
The G-clamp is manufactured from carbon steel and has been powder coated.....
N$ 406.70
Ex VAT:N$ 353.65
Brand: TORK CRAFT
MPN: CL CICC4B
C-clamp set
Clamps in the set:
(x2) C-clamp with 25mm clamp capacity.
(x2) C-clamp with 50mm clamp capacity.
Application:
The C-clamp is used to secure workpieces to a bench or a template during an
assembly. It can also be used in woodwork projects to glue/join pieces of wood.
The C-clamp is manufactured from carbon steel and has been powder coated.....
N$ 316.08
Ex VAT:N$ 274.85
Brand: TORK CRAFT
MPN: CL FCG120-1000
F-type clamp
Clamping
length:
1000mm
Throat: 120mm
Rail: Steel
Jaws: Malleable cast iron
Spindle: Steel
Handle: Wood
Application:
The F-type clamp is also referred to as a speed clamp. It is similar to a G-clamp
in use, but has a wider throat (opening capacity) and is faster to clamp and to
readjust.
Use in woodworking:
Wood assembly and joinery (screws, glue, biscuits).
Clamping down edging to board material.
Use in metalworking:
Holding piece..
N$ 746.35
Ex VAT:N$ 649.00
Brand: TORK CRAFT
MPN: CL FCG120-1200
F-type clamp
Clamping
length:
1200mm
Throat: 120mm
Rail: Steel
Jaws: Malleable cast iron
Spindle: Steel
Handle: Wood
Application:
The F-type clamp is also referred to as a speed clamp. It is similar to a G-clamp
in use, but has a wider throat (opening capacity) and is faster to clamp and to
readjust.
Use in woodworking:
Wood assembly and joinery (screws, glue, biscuits).
Clamping down edging to board material.
Use in metalworking:
Holding piece..
N$ 803.85
Ex VAT:N$ 699.00
Brand: TORK CRAFT
MPN: CL FCG120-1500
F-type clamp
Clamping
length:
1500mm
Throat: 120mm
Rail: Steel
Jaws: Malleable cast iron
Spindle: Steel
Handle: Wood
Application:
The F-type clamp is also referred to as a speed clamp. It is similar to a G-clamp
in use, but has a wider throat (opening capacity) and is faster to clamp and to
readjust.
Use in woodworking:
Wood assembly and joinery (screws, glue, biscuits).
Clamping down edging to board material.
Use in metalworking:
Holding piece..
N$ 1,033.85
Ex VAT:N$ 899.00
Brand: TORK CRAFT
MPN: CL FCG120-2000
F-type clamp
Clamping
length:
2000mm
Throat: 120mm
Rail: Steel
Jaws: Malleable cast iron
Spindle: Steel
Handle: Wood
Application:
The F-type clamp is also referred to as a speed clamp. It is similar to a G-clamp
in use, but has a wider throat (opening capacity) and is faster to clamp and to
readjust.
Use in woodworking:
Wood assembly and joinery (screws, glue, biscuits).
Clamping down edging to board material.
Use in metalworking:
Holding piece..
N$ 1,378.85
Ex VAT:N$ 1,199.00
Brand: TORK CRAFT
MPN: CL FCG120-300
F-type clamp
Clamping
length:
300mm
Throat: 120mm
Rail: Steel
Jaws: Malleable cast iron
Spindle: Steel
Handle: Wood
Application:
The F-type clamp is also referred to as a speed clamp. It is similar to a G-clamp
in use, but has a wider throat (opening capacity) and is faster to clamp and to
readjust.
Use in woodworking:
Wood assembly and joinery (screws, glue, biscuits).
Clamping down edging to board material.
Use in metalworking:
Holding pieces..
N$ 458.85
Ex VAT:N$ 399.00
Brand: TORK CRAFT
MPN: CL FCG120-400
F-type clamp
Clamping
length:
400mm
Throat: 120mm
Rail: Steel
Jaws: Malleable cast iron
Spindle: Steel
Handle: Wood
Application:
The F-type clamp is also referred to as a speed clamp. It is similar to a G-clamp
in use, but has a wider throat (opening capacity) and is faster to clamp and to
readjust.
Use in woodworking:
Wood assembly and joinery (screws, glue, biscuits).
Clamping down edging to board material.
Use in metalworking:
Holding pieces..
N$ 516.35
Ex VAT:N$ 449.00